Nathan's Point


A modern-era proto-freelance H0 scale layout with a NSW terminal and regional theme.

The layout is a point-to-point design with the open staging yard being the main yard (Jonestown) of the layout and comprising of a basic loco facility, intermodal terminal, grain receival terminal and a passenger station.

From the yard, the mainline (or in this case the branchline) operates through a grain loading town (Heidiville) and then continues onto the terminus town (Nathans Point) which is also a grain town and includes a regional intermodal terminal, passenger station, and small steel distribution centre.

There is no hidden staging, with all trains operating with an on-layout purpose.

Follow along as the layout finally gets closer to reality during 2018 and 2019!


Sunday, October 7, 2018

A bit of a tidy up, and getting things ready

After running my US outline stuff the last few weeks (mainly Wisconsin Central), I have been really torn about going back to Aussie outline, especially with the wide variety of US freight cars and the ability to have a lot of small industries, and even large industries (ie paper mill) that receive a lot of different freight cars.  I may still go back to that space, but I thought it be best to get out the real models and start planning an operating session.

The rural container terminal located at the terminus Nathans Point.  I had a pair of SCTs on the layout from the other day, so they did the honours of running a 15 wagon container train.

A pair of SSRs on a mill wheat train at Heidiville.  A normal sized grain train cannot load without a shuffle of wagons.  Also at Heidiville I am looking at installing another turnout which leads to a single hidden track/staging/interchange.  This will give the feel of a branch line not modelled.  

The container terminal at Jonestown has had a kick along over the last few weeks and especially today.  I painted the ply, extended the sidings slightly, set up the containers, and put containers on a second intermodal train, ready to depart.  The container block the two long grain intake roads.

Jonestown Yard with a Graincorp grain train waiting for the next turn of duty, plus quit a few steel wagons needing some sorting.  Jumbo coil and butter boxes will be the main freight on the layout. 

The other end of the yard with a pair of Graincorp 48200s on a short string of NGPF/KF hoppers.  

I'm still torn with if I want/need off layout staging.  I initially didn't build anything as I know that a second level or deck would take a lot more time and I ran the risk of never actually getting anything finished.  The option now is to put a deck over Nathans Point, but it will kill the scene, but there isn't enough space underneath (which is where is originally should have gone).  

I've also been busy filling in the track joints with sleepers and brushing a bit of brown paint around to get rid of that unbuilt look.

Enjoy! 




2 comments:

  1. its coming along a treat! nothing too cluttered, still plenty of space for everything. Other prototypes are always tempting, Keep focused, and once you start making scenery that identifies the location everything will start to fall into place and you will be fine.

    ReplyDelete
  2. its coming along a treat! nothing too cluttered, still plenty of space for everything. Other prototypes are always tempting, Keep focused, and once you start making scenery that identifies the location everything will start to fall into place and you will be fine.

    ReplyDelete